|
|
|
| Usually caused by | Cured by |
| Air pressure too high. | Reduce air pressure. |
| Wax too hot. | Adjust temperature. |
| Plates held with uneven pressure/not covering mould. | Hold plates firmly, distributing pressure evenly over entire mould surface. |
| Mould held too long at nozzle. | Hold for less time. |
| Casting problems | |
| Wax pattern problems | |
| Mould rubber problems | |
| Mixing guide | |
| De-wax and burnout cycles | |
| Sitemap | |
Gold Star Powders